A panic alarm, also known as an intruder alarm detector, is used in emergencies and will confirm a signal to the ARC for a police response.
There is a diverse range of alarm grades ranging from grade 1 through to grade 3. Once you have established the correct grade, in accordance with BS50131, you can then go on to buy the correct type of panic alarm device.
Similar to the grades, there is a range of different types available. These include:
- Single push
- Double push
- Electronic
Example – Wiring a Double Push Panic Alarm
- Check to make sure all alarm cables are wired in accordance with BS5131 and PD6662:210
- Set the jumper switch to the normal close
- Select the correct resistance level for EOL and contacts – this can be obtained from the panel manufacturer
- Select the circuit type – in this instance normal open or normally closed
- Wire your alarm cable to contact and EOL terminals
- Change the zone type as PA or silent PA
We would love to hear from you!
Did this help you? Would you like to know more about security systems and the growing security industry? We love to hear feedback from our readers. Make sure to contact us through the link down below: